Kali Journal

Riding into the Future

We had plans. You had plans. So many plans left twisting in the sands of time.  But optimism is starting to seep in and we are dreaming of starting to plan again. We're starting to flip through old photos, stare at google maps and dream of open roads, filled with twisties, far from where we sit.  And we thought, what better way to prime this pump then to share the roads we hope to roll on the other side of this pandemic. We've even thrown in some accommodation recommendations and musical musing.  Where do you dream of taking your two-wheeled wonder when the opportunity presents itself.    San Francisco's Must Ride Route. This is the ride I recommend for when people visit from out of town. This ride is especially scenic. From oceans to mountains, it’s like riding in Scotland without the long flight. It is open year round except when there is the occasional mudslide or fire depending on the season and is all paved but heads up, it can be a rough road and there is limited cell service most of the way. This ride has lots of places to stop and explore with lots of options for side excursions. When preparing for this epic ride make sure to bring cool weather gear, because even in the summer months, the coast can get chilly (60s). I recommend listening to Enya, Dead Can Dance, Lorena McKinnet or Emancipator… you won’t regret it.   SoCal Soujourn. Before you roll out I highly recommend you load your Ennio Morricone for the proper sound mix. This ride has majestic views that cannot really be captured. There are big fast open stretches and is passable most of the year. Be aware, it gets blazing hot in the summer, so it is always a good idea to pack some food and water. It is also very remote with limited to no cell service in places. Some great music choices are: Doors, Cult, America, Daft Punk, and Morrocan Spirit.     The Great Lakes Hot Lap. This route starts and ends in Duluth so riders can get their farkle fix at Aerostitch. A coastal ride through the middle of America and Canada, definitely one to mention… You can ride across the Richard I. Bong “Bong” lift bridge for a scenic start. Rainsuits or gore tex liners are a necessity, visit Aerostitch get your suit measured and farkles loaded up for the trip. Another cool aspect of this trip are the two very cool ferry crossings you can see near The Slash and Ludington. You should consider rocking out to Last of the Mohicans, Styx, The Clash or ELO. Oh and don’t forget your passport.    The Old West Movie Ride. This romp with take you all the way from Ariona to Billings, Montana. The route gets its name due to the fact all those awesome old school westerns were filmed in this valley. I recommend staying one night in Kanab so you can stay in the Jack Palance room or other famous western star rooms at the Parry Lodge. Make sure to pack cold weather gear even in mid summer, because you just might run into hail and snow in July. Yellowstone looks like it is closed due to winter closures, but a hidden gem that you can’t miss is the Beartooth Highway out of the Silver Gate into Billing, it’s the highest highway in the USA reaching fourteen thousand feet in places.There is always packs of wildlife, so keep your eyes peeled, especially after dark. The Bison don’t have lights. And don't forget to get your playlist dialed with some on-point music for one of the most epic routes in the world. Think anything from the Bonaza theme to Lord of the Rings soundtrack.  
read more

Boaz bought his first Moto at 12. He didn't tell his parents.

The following is an interview with our very own Jeffery Boaz, conducted outside an amazing little cafe in Guerneville, CA, on the Russian River. It seemed like an incredibly appropriate place to grill Jeffery about his life behind bars, as he fully admits one of his favorite things to do on a long motorcycle ride is to stop, have a cup of coffee and pick the brains of the locals about where the hidden twisties might be. 
read more

The Intersection of Motorcycles, Helmets and Safety

What follows is a brief conversation with Kali Founder Brad Waldron as we relaunch the Kali Motorsports Journal to bring you stories at the intersection of motorcycles, helmets and safety.  Brad, so even though Kali Protectives has become better known as a bicycle helmet brand, you make it clear when you talk about the brand that motorcycle helmets drive everything Kali does. Can you explain?  Kali got its start when we wanted to improve the process of making a traditionally constructed motorcycle helmet, where you take the protective foam and glue it into the shell. This is still the way helmets are made for the majority of companies. The shell spreads the load before the foam takes over the job of dissipating the energy. There is a gap between the shell and foam, as it is near impossible to get a perfect match when they are made separately. When you hit the outer shell there is little energy being dissipated, so your brain is moving rapidly around the inside of your skull. We now take the shell and inject the protective EPS, Contigo or Cassidian, into the shell which subsequently eliminates all the gaps. Now that foam is a perfect match for the shell and thus it is supporting the shell. These structure then support each other. This allows us to make a thinner shell, which allows the impact force to get to the energy dissipating foam quicker, which helps slow down the rapid movement of the brain.   Moto helmets as a structure are more complicated and more expensive in general. This gives us more room to work and experiment. Don Morgan’s ‘Conehead’ idea of putting crumple zones in the protective foam was easier in a helmet with little or no ventilation holes. We learned on the moto helmets and then took on how to get it into the much smaller space of a bicycle helmet with holes all over it. Same with LDL, how and where to put it and test it , was a lot easier when you have a larger surface to work with. Once you have a baseline, you can get more creative.     You are pretty passionate about motorcycle helmet design and you have a warehouse full of motorcycles in all shapes and sizes. Have you always ridden motorcycles? Can you tell us a little bit about your very first motorcycle?  I haven’t always ridden, as a matter of fact my dad had a Honda 100 when I was young, but after my brother ‘took’ it to Huntington Beach (probably took him 9 hours on that bike) for a surf trip I was never allowed to touch it. It wasn’t really until I started making carbon parts for motorcycles that I decided I needed a bike. I like to be active in the things I’m building. I was never able to catch a ride on an F-18 Fighter when I was working on them, but would have jumped at the chance. The local hangglide community has asked me to work on a helmet for them, which has me re-thinking that I need to be active in all things I work on.  Anyway, I found a used Yamaha 426. And anyone who knows that bike knows that it is super tricky to start, so the only solace I had when it was stolen was laughing at the poor person who was trying to start it. It was a pretty big bike for a first bike, but I loved the power it had to pull me up the steeps, without too much finesse.  Since then our quiver has grown, now we have a Honda 250, Kawasaki 450, and my wife Charlotte’s Yamaha 125. My mechanic says I need to sell those for an old man bike, like a KTM 300 with electric start and a kickstand. Hmmm?  On the road side my main bike is my Ducati 796 and my GSXr 600, plenty fast enough for me. Oh, there is also a Moto Guzzi Nevada and Kawi 250 dual sport. Seems like a lot when I write it down, I’ve never bought a brand new bike.    As with all things, we never get to do the things we love to do as often as we would love to do them, but if you could throw your leg over one of your two wheeled steed today, where would you go and what would you do? Oh man, there are so many cool options. I would probably start with Highway 1. Either way, North up the Oregon coast to Vancouver, or South to Tijuana. There is so much coastline and fun twisties around here. No matter if it’s the 17 mile drive down to Big Sur or up the Avenue of the Giants it all sounds great as I sit here at my desk.    Can you tell us one thing you are super proud of when it comes to your work in Moto? I believe in what we are doing, the technologies that we apply to our moto helmets are significant and make for a product that, in my opinion, gives you the best possibility to survive to get up and ride again. Unfortunately, it is not cheap to put these technologies into our helmets. Being an independent brand, and not a major distributor, costs are an issue. Distributors own their own helmet brands and are most interested in price sensitive options.  A helmet, is a helmet, is not true. There are brands out there, not just Kali, that are doing more than a basic, a helmet is a helmet is a helmet.    Where do you think Kali Protectives will go with their motorcycle design in the future?  We will stay true to our original mission, which is to make the safest helmets we know how to make. Never ending commitment to follow the research as well as do our own R&D. Put as much technology into each product as we can at each price point. And continue to drive the technology down to all price points.
read more